Editing A Solution Pack - Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual

14.4.7 Editing a Solution Pack

A saved Solution Pack can be edited by using the Solution Designer. For information about
deploying the changes into an existing system, see
Pack," on page 340.
When an existing Solution Pack is saved, the user has several options:
Save: Saves an updated version of the original Solution Pack. If the Solution Pack is re-
imported into a Sentinel system, it replaces the old version.
Save As: Saves a renamed version of the original Solution Pack. If the Solution Pack is re-
imported into a Sentinel system, it replaces the old version.
Save As New: Saves a Solution Pack with a new unique identifier. If the Solution Pack is
imported into a Sentinel system, it does not impact any previously imported Solution Packs.
To edit a Solution Pack:
1 Start the Solution Designer by executing one of the following commands:
solution_designer.sh (in <Install_directory>/bin)
The Sentinel Solution Designer login window displays.
2 Provide your login credentials. Select the Work Offline check box if desired, then click Login.
The Solution Designer displays.
3 To edit a Solution Pack, click File > Open. Browse and select the existing Solution Pack ZIP
file. Click Open.
4 To update the Solution Pack with modified content from the source Sentinel system, drag and
drop the content from the Content Palette to the appropriate control.
5 Add or delete controls as necessary.
Section 14.5, "Deploying an Edited Solution
Solution Packs 339