Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual page 260

To use this feature, you must have the User Management user permission. For more information, see
the Sentinel 6.1 Rapid Deployment Reference
"Creating a User Account Through LDAP Authentication" on page 260
"Creating a User Account Through Local Authentication" on page 262
"Creating a User Account Through Domain Authentication" on page 263
Creating a User Account Through LDAP Authentication
NOTE: This option is applicable only for Sentinel 6.1 Rapid Deployment SP1 and later. By default,
this option is disabled. Configure the server as given in
Rapid Deployment Install Guide to enable this option.
1 Select the Admin tab.
2 Open the User Configuration folder.
3 Open the User Manager window.
4 Click Add a new User.
or
Right-click any user and select Add User.
The Add User window is displayed.
5 In the Add user window, perform the following:
5a Select LDAP for Authentication.
5b Specify the LDAP username.
5c For a Security Filter, click the down-arrow.
The Filter Selection window is displays and shows all the public filters.
5c1 Select a filter, then click Select.
5d Specify the LDAP User DN.
For example, cn=sentinel_ldap_user,o=novell
NOTE: This field is available only if you have selected
LDAP directory
information, see
Authentication" in Sentinel 6.1 Rapid Deployment Installation Guide.
IMPORTANT: Do not leave the LDAP User DN field empty.
260 Sentinel 6.1 Rapid Deployment User Guide
or
Click Add to create, then select a new filter.
After assigning a security filter to a user, you cannot delete that filter.
" parameter while configuring LDAP authentication. For more
"Configuring Sentinel 6.1 Rapid Deployment Server for LDAP
Guide.
"LDAP Authentication" in the Sentinel 6.1
for
n
"Anonymous searches on