Transitions; Unconditional Transitions - Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual

6.6 Transitions

Transitions are used to connect steps. There are several types of transitions:
Unconditional
Conditional
Timeout
Alert
Else
Error
A transition can have the following attributes:
Name
Description
Destination
Expression
Timeout Values
Different steps have different properties and therefore they are associated with different transition
types.
Steps and Valid Transition
Table 6-5
Step Type
Decision
Manual
Command
Mail
Activity

6.6.1 Unconditional Transitions

An unconditional transition must always be used from a start step. manual, command, activity, and
mail steps can also have unconditional transitions. The only parameter for an unconditional
transition is the next step.
This path is taken when the current step is completed (unless a timeout transition is configured and
the timeout period elapses).
Valid Transitions
Conditional
Else
Unconditional
Timeout
Alert
Unconditional
Timeout
Alert
Error
iTRAC Workflows 141