Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual page 140

2 Provide a name for this step.
3 Specify the path and name of the command or script to execute (relative to the
<Install_directory>/config/exec)
4 If you want to run a command or script referenced in a variable that is populated during the
workflow process, select the Use Variables check box.
5 Specify any command-line arguments to pass to the command or script. If you want to use the
contents of a variable that is populated during the workflow process, select the Use Variable
check box.
6 Specify a variable to hold output from the command or script. Any standard output is placed
into these variables.
7 Click Description tab to provide a description for this step.
8 Click OK.
Deleting Steps
1 Click the iTRAC tab.
2 In the Navigator, click iTRAC Administration > Template Manager.
3 Select an existing template, then click View/Edit. The iTRAC Process Builder window
displays.
4 Right-click an existing step, then click Delete Step.
5 In the Alert Message window, select Yes to delete.
140 Sentinel 6.1 Rapid Deployment User Guide