Table of Contents
Advertisement
Patches
Hotfixes
Section 12.2.1, "Starting a Sentinel Server," on page 286
Section 12.2.2, "Stopping a Sentinel Server," on page 286
12.2.1 Starting a Sentinel Server
1 Log in to the machine where the Sentinel server you want to start as the Sentinel Administrator
operating system user.
2 Go to the
3 Run the following command:
./sentinel.sh start
12.2.2 Stopping a Sentinel Server
1 Log in to the machine where the Sentinel server you want to stop is installed. Use the Sentinel
Administrator operating system user credentials (by default admin).
2 Go to the
3 Run the following command:
./sentinel.sh stop
12.3 Sentinel Scripts
Depending upon which components are installed,
or all of the scripts below. The operational scripts are appropriate for use during normal operations
of Sentinel. The troubleshooting scripts should only be used when troubleshooting an issue.
For most scripts that require arguments, running the scripts without arguments provides details
about the arguments and usage of the script.
Section 12.3.1, "Operational Scripts," on page 286
Section 12.3.2, "Troubleshooting Scripts," on page 287
12.3.1 Operational Scripts
The scripts below can be used during the normal operation of Sentinel.
Table 12-1
Script File
adv_change_passwd.sh
advisor.sh
286 Sentinel 6.1 Rapid Deployment User Guide
<Install_directory>/bin
<Install_directory>/bin
Operational Scripts
Description
Resets the encrypted Advisor password stored in the Advisor
configuration files.
Starts the Internet download and processing of Advisor feed data.
This script is scheduled to run automatically when Advisor is
installed.
directory.
directory.
<Install_directory>/bin
might contain some
Advertisement
Table of Contents
