Table of Contents
Advertisement
Duplicated Content with in a Solution Pack
Figure 14-5
Content with the Same Name in the Target Sentinel System
If the Solution Manager detects content with the same name but a different unique identifier in the
target Sentinel system, the Solution Manager installs the content with a unique ID appended to the
name. For example, the rule from the Solution Pack might be named Unauthorized Firewall Change
(1). The existing rule in the Sentinel system is unchanged.
NOTE: To prevent confusion for end users, Novell recommends that one of these rules be renamed.
14.3.4 Implementing Controls
After the content installation, additional steps might be necessary to fully implement a control, such
as the following examples:
Populating a
file that is used by the mapping service for event enrichment.
.csv
Scheduling automatic report execution in the Crystal Reports Server.
Enabling auditing on source devices.
Copying an attached script for the Execute Command correlation action to the appropriate
location on the correlation engines.
These steps should be added when the Solution Pack is created in Solution Designer.
To implement a control:
1 Open a Solution Pack in the Solution Manager.
2 Select a control.
3 Click the Implementation tab in the Documentation frame.
4 Follow all of the instructions in the Implementation tab.
Solution Packs 325
Advertisement
Table of Contents
