Table of Contents
Advertisement
Sentinel Control Center
2
®
Novell
Sentinel
gathers and correlates security and non-security information from across an
TM
organization's networked infrastructure, as well as third-party systems, devices, and applications.
Sentinel presents the collected data in an richly functional interface, identifies security or
compliance issues, and tracks remediation activities, streamlining previously error-prone processes
and building a more rigorous and secure management program. The Sentinel Control Center (SCC)
is the main user interface for viewing and interacting with this data.
Section 2.1, "Log In to the Sentinel Control Center," on page 41
Section 2.2, "About Sentinel Control Center," on page 42
Section 2.3, "Introduction to the User Interface," on page 45
2.1 Log In to the Sentinel Control Center
Section 2.1.1, "Linux," on page 41
Section 2.1.2, "Windows," on page 41
2.1.1 Linux
1 As the Sentinel Administrator (admin), change directory to:
<Install_directory>/bin
2 Run the following command:
./control_center.sh
3 Specify your username and password, then click OK.
A Certificate window displays.
4 Select Accept, if you want this message to display every time you start Sentinel on your system.
To avoid this, you can select Accept Permanently.
2.1.2 Windows
1 Perform either of the following:
Go to Start > Programs > Sentinel and select Sentinel Control Center. The Sentinel Login
window displays.
Click Applications in the left panel of the Novell Sentinel 6.1 Rapid Deployment Web
interface, then click Launch Control Center:
2
Sentinel Control Center
41
Advertisement
Table of Contents
