Adding Content To A Solution Pack - Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual

14.4.5 Adding Content to a Solution Pack

A vital part of creating a Solution Pack is adding content to the controls. Each control can have one
or more types of content associated with it.
"Sentinel Content" on page 336
"JasperReports" on page 337
"Placeholders" on page 337
"File Attachments" on page 337
Sentinel Content
The same general procedure is used to add all types of Sentinel content to a Solution Pack. The
Sentinel content options include the following:
Correlation rule deployments, including their deployment status (enabled or disabled) and
associated correlation rules, correlation actions, and dynamic lists
Reports
iTRAC workflows, including associated roles
Event enrichment, including map definitions and event meta tag configuration
Other associated files added when the Solution Pack is created, such as documentation,
example report PDFs, or sample map files.
The general steps for Sentinel content are described below.
NOTE: Because dynamic list elements and map data are often highly dependent on the system
environment, this data is not included as part of the dynamic list or map definition in the Solution
Pack. However, this data can be attached to the Solution Pack as a
To add Sentinel content to a control:
1 Log into Solution Designer in connected mode.
2 Open or create a Solution Pack.
3 Click the appropriate panel to display the available reports from the Content Palette: Solution
Pack, category, control, content group and contents.
4 Select the specific content group you want to add.
5 Select the appropriate control or placeholder and click Add Selected Content. Alternatively,
drag and drop the selected content group to the appropriate control or placeholder in the
Solution Pack frame.
NOTE: If you try to add preexisting content in Solution Designer by dragging and dropping, the
existing content is highlighted. After you drop the content, a message prompt displays, stating
existence of similar content.
336 Sentinel 6.1 Rapid Deployment User Guide
file.
.csv