Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual page 245

Using the same setup as the previous example, if:
The Event Tag is set to TargetIP and key column set to column 1 (range)
Map Column is set to column 2 (value). The output values are for CustomerVar89.
Number Range Map Definition
Figure 10-13
Event Configuration
Figure 10-14
If an event contains a target IP of 10.0.1.14 (equivalent to a numerical value of 167772430), the
output for the CustomerVar89 column within the event is BBB.
Sentinel supports the following number ranges:
Range from negative number to negative number (for example, "-234—34")
Range from negative number to positive number (for example, "-234-34")
Range from positive number to positive number (for example, "234-236")
Single number range (negative) (for example, "-234"). In this case, the minimum and the
maximum are both " -234".
Single number range (positive) (for example, "234"). In this case, the minimum and the
maximum are both "234".
Range from negative number to max number (for example, "-234-"). In this case, the minimum
is "-234" and the maximum is (2^63 - 1).
Range from positive number to max number (for example, "234-"). In this case, the minimum
is "234" and the maximum is (2^63 - 1).
NOTE: In all cases, the min must be less than or equal to the max (for example, "-234- -235" is not
valid).
Administration 245