Table of Contents
Advertisement
7 Edit as needed.
8 Click OK until you exit the Transitions window.
9 Click Save.
Deleting Transitions
1 Click iTRAC tab.
2 In the Navigator, click iTRAC Administration > Template Manager.
3 Select an existing template, then click View/Edit. The iTRAC Process Builder window
displays.
4 Right-click an existing step and select Remove Transition.
5 In the Alert Message window, click Yes.
6.7 Activities
An activity is very similar to a command step, except that activities are reusable and cannot use
input or output variables. The Activities pane shows a library of user-defined, reusable activities that
can reduce the amount of configuration necessary when building templates.
Activities are exported or imported as XML files. These files can be exported or imported from one
system to another.
Section 6.7.1, "Incident Command Activity," on page 150
Section 6.7.2, "Incident Internal Activity," on page 151
Section 6.7.3, "Eradication Activity," on page 151
Section 6.7.4, "Incident Composite Activity," on page 151
iTRAC Workflows 149
Advertisement
Table of Contents
