Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual page 288

Table 12-2
Script File
start_broker.sh
stop_broker.sh
"Starting the Communication Server in Console Mode" on page 288
"Stopping the Communication Server in Console Mode" on page 288
Starting the Communication Server in Console Mode
These scripts start the communication server on the command line in console mode. The scripts are
useful for debugging the communication server without requiring you to run the rest of Sentinel
server.
NOTE: During normal operations, you should not use these scripts. Instead, follow the procedures
in Section 12.2.1, "Starting a Sentinel Server," on page
1 Log in as the Sentinel Administrator operating system user.
2 Go to:
<Install_directory>/bin
3 Enter:
./start_broker.sh
Stopping the Communication Server in Console Mode
These scripts stop the communication server on the command line in console mode. The scripts are
useful for troubleshooting the communication server without forcing you to stop the rest of Sentinel
server.
NOTE: During normal operations, you should not use these scripts. Instead, follow the procedures
in Section 12.2.2, "Stopping a Sentinel Server," on page
1 Log in as the Sentinel Administrator operating system user.
2 Go to:
<Install_directory>/bin
3 Enter:
./stop_broker.sh
288 Sentinel 6.1 Rapid Deployment User Guide
Troubleshooting Scripts
Description
Removes Sonic lock files in the event of an abnormal shutdown.
Starts the message bus component of the communication server.
This script is useful if you are having problems starting the
message bus. This script is automatically run by the installer. For
more information, see "Starting the Communication Server in
Console Mode" on page 288.
Starts the SQL Server Agent Service and configures it to run
automatically. This script is run automatically by the installer.
Stops the message bus component of the communication server.
For more information, see
in Console Mode" on page
286.
286.
"Stopping the Communication Server
288.