Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual page 168

Top 10 Initiating User Names
Top 10 Target Port Names
Top 10 Event Names
The Top 10 dashboards are enabled by default, and the following summaries are turned on to enable
the Top 10 dashboards:
EventDestSummary
EventSevSummary
EventSrcSummary
If Top 10 dashboards are not needed, you can disable these summaries, or you can enable additional
summaries in order to use them for reporting. If the summary service is not in use, you can disable it.
To enable or disable summaries:
1 In the Sentinel Control Center, go to Admin > Report Data Configuration.
2 Select the Summary to enable or disable and click the status (Active/Inactive) of that summary.
3 Select Yes to confirm that you want to change the status of the summary.
To enable or disable EventFileRedirectSerice:
1 At your Sentinel machine, using text editor, open:
<Install_directory>/config/das_binary.xml
2 For EventFileRedirectService, change the status to on or off, as appropriate. For example:
<property name="status">off</property>
3 Log in to the Sentinel Control Center as the Sentinel Administrator.
4 Go to Admin > Servers View.
168 Sentinel 6.1 Rapid Deployment User Guide