Viewing An Incident; Attaching Workflows To Incidents - Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual

2 Specify the following information:
Title: Specify the title of the incident.
State: To set state of the incident, select from the drop-down list.
Severity: To indicate the severity of the incident, select from the drop-down list.
Priority: To indicate the priority of the incident, select from the drop-down list.
Category: Specify the category of the incident.
Responsible: To assign the responsibility to investigate and close the incident, select
from the drop-down list.
Description: Specify the description of the incident in the text area.
Resolution: Specify the resolution description in the text area.
3 Click Create.The incident ID automatically generates after you click Create.
For more information on creating an incident and grouping events, see
Incidents," on page

5.4.2 Viewing an Incident

1 Click Incidents > Display Incident View Manager or click the Display Incident View Manager
button on the toolbar.
2 Open an incident by doing one of the following:
Selecting a view from the Switch Views button in the bottom right corner.
Double-click an incident in the Incident View Manager window.

5.4.3 Attaching Workflows to Incidents

1 Open an incident.
116 Sentinel 6.1 Rapid Deployment User Guide
63.
Section 3.7, "Creating