Table of Contents
Advertisement
4 In the Process Details window, provide a name and description (optional) of the template and
click OK.
5 Do one of the following:
Drag and drop a step from the Step Palette or an activity from the Activities pane into the
Process window.
Click the New Step drop-down button in the upper left corner and select one of the
following step types. Right-click Start step, select Insert New and select one of the
following step types.
6 Add as many steps and activities as needed to create the template.
7 Create transitions between each step. To create transitions, right-click the step after which you
need to add transition and click Add Transition.
Any step (except for the End step) might have one or more exit transition lines. A decision step
must have at least two exit lines.
8 Right-click each final step in the template and click Add End Transition.
On the bottom of the iTRAC Template Builder is a message pane that lists any warnings or
errors about incomplete steps during the construction.
9 To save your process, go to File>Save or click Save button.
6.4.2 Managing Templates
After creating a template, you can modify, copy, or delete it.
"Viewing/Editing Templates" on page 129
128 Sentinel 6.1 Rapid Deployment User Guide
Decision Step
Mail Step
Manual Step
Command Step
Advertisement
Table of Contents
