Managing Solution Packs - Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual

Documentation Frame
The Documentation frame provides a description of selected node.The information was provided
when you created the Solution Pack by using the Solution Designer. For more information on the
Solution Designer, see
The following informational tabs, which are populated and edited by using the Solution Designer,
are available in Documentation frame:
Description: Displays the description of selected node. An additional Attachment panel is
included on this tab. You can view attachments and their description in the Description tab.
The user can add text to the External ID field to refer to specific regulations or corporate IDs.
Implementation: This tab, which is associated with the control nodes, displays the instructions
for implementing the selected control.
Testing: This tab, which is associated with the control nodes, displays the instructions for
testing the selected control.
Notes: This tab, which is associated with the control nodes, is editable. It can be used for any
notes related to the control, including user comments on the testing or implementation process.
Figure 14-3

14.3 Managing Solution Packs

Section 14.3.1, "Importing Solution Packs," on page 317
Section 14.3.2, "Opening Solution Packs," on page 319
Section 14.3.3, "Installing Content from Solution Packs," on page 321
Section 14.3.4, "Implementing Controls," on page 325
Section 14.3.5, "Testing Controls," on page 326
Section 14.3.6, "Uninstalling Controls," on page 326
Section 14.3.7, "Viewing Solution Pack Status," on page 328
Section 14.3.8, "Deleting Solution Packs," on page 330
316 Sentinel 6.1 Rapid Deployment User Guide
Section 14.4, "Solution Designer," on page
Documentation Frame
331.