Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual page 225

Global Filter Configuration
Figure 10-4
NOTE: The Action column and the Action Manager button are available only on systems that have
Sentinel 6.1 RD Hotfix 2 or later installed.
Creating a Global Filter
1 Click the Admin tab.
2 Click Admin > Global Filter Configuration or select Global Filter Configuration in the
navigation tree.
3 In the Global Configuration window, click Add.
4 In the new blank row, click the Filter Name column.
5 In the Filter Selection window, highlight a relevant filter and click Select, or click Add if you
need to create a filter.
6 In the Active column, select the checkbox to associate the filter with the options specified in the
Route and Action columns.
NOTE: If the Active checkbox is not selected, the options sepecified in the Default Route and
Default Action will be associated to the filter. If the Default Action is set to None, then no
action will be associated to the filter.
7 In the Route column, select the routing action that the global filter will have on events that pass
this global filter.
If an event does not meet any of the active global filters, the default action determines how the
event is handled.
Administration 225