Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual page 306

To run this process, this process must first be assigned to an incident.
To start or terminate a process:
1 Click the Incident tab.
2 Click Incidents > Create Incidents.
3 Specify the following:
Title: iTRAC Tutorial.
Category: Other.
Responsible: assign this incident to yourself.
4 Click the iTRAC tab, then select iTRAC Process Tutorial.
5 Click Create.
Because this is a tutorial incident and not a true incident, it can be deleted without negatively
affecting your Sentinel setup.
6 From anywhere in the Sentinel GUI, click the Analyst group (yellow bar) under View Work
Items.
Your bar might already be partially green, indicating that you have accepted (acquired) an
iTRAC Process.
All of the processes assigned to the Analyst role display.
7 To accept a work item, select iTRAC Tutorial and click Acquire.
If the View Work Item list bar was yellow as illustrated above, it changes with an addition of a
green bar.
8 Click the green bar under View Work Items. In the Work Items window, click View Details.
306 Sentinel 6.1 Rapid Deployment User Guide