Table of Contents
Advertisement
Section B.17.2, "Controlled Process is started," on page 471
Section B.17.3, "Controlled Process Is Stopped," on page 472
Section B.17.4, "Importing Auxiliary," on page 472
Section B.17.5, "Importing Plug-In," on page 472
Section B.17.6, "Load Esec Taxonomy to XML," on page 473
Section B.17.7, "Process Auto Restart Error," on page 473
Section B.17.8, "Process Restarts," on page 473
Section B.17.9, "Proxy Client Registration Service (medium)," on page 474
Section B.17.10, "Restarting Process," on page 474
Section B.17.11, "Restarting Processes," on page 474
Section B.17.12, "Starting Process," on page 475
Section B.17.13, "Starting Processes," on page 475
Section B.17.14, "Stopping Process," on page 475
Section B.17.15, "Stopping Processes," on page 476
Section B.17.16, "Store Esec Taxonomy From XML," on page 476
Section B.17.17, "Watchdog Process is started," on page 476
Section B.17.18, "Watchdog Process Is stopped," on page 477
B.17.1 Configuration Service
General : Configuration Service
Table B-155
Tag
Value
Severity
Event Name
saveConfig
Resource
SubResource
ConfigService
Message
Saving configuration, unit {0} app {1} userId {2}
B.17.2 Controlled Process is started
Watchdog is run as a service. Its main purpose is to keep Sentinel processes running. If a process
dies, Watchdog automatically restarts that process. This event is sent when a process is started.
General : Controlled Process is started
Table B-156
Tag
Severity
Event Name
Value
1
ProcessStart
System Events for Sentinel 471
Advertisement
Table of Contents
