Managing Alerts - Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 - ADMINISTRATION Administration Manual

3 Adjust the trigger number. This number varies, depending upon the type of alert.
4 Select the number of days that this number must be met.
5 Select the trigger type, whether it's the warning icon (
6 Click Enable this alert.
7 Click Save.

5.4.3 Managing Alerts

Alerts notify you of issues that need to be remedied within the endpoint security environment.
Remediation is normally handled on a case-by-case and individual or group basis. To help identify
the issue, Alert reports are displayed when the alert is selected.
Figure 5-7
This report displays the current trigger results, displaying information by affected user or device.
The data provides the necessary information to take remediation actions to correct any potential
corporate security issues. Additional information can be found by opening Reporting.
Once remediation actions have been taken, the alert remains active until the next reporting update.
To clear an alerts:
1 Select an alert from the list, then click the Configuration tab on the right.
50 ZENworks Endpoint Security Management Administration Guide
Alert Reporting
) or the emergency icon ( ).