Installing Orchestrate Vm Client In A Linux Environment - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual
Hide thumbs
Also See for PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009:
- Upgrade manual (60 pages)
Table of Contents
Advertisement
When the installation has completed, the Install Complete page is displayed:
11 Click Done to finish the installation.
If you selected to place the shortcut icon on your desktop, this is what it looks like:
12 For some necessary setup tasks, continue with
Orchestrate 2.0 VM Client Guide and
2.5.3 Installing Orchestrate VM Client in a Linux Environment
1 Copy the PlateSpin Orchestrate 2.0 product ISO file to your management Linux workstation.
2 Open a terminal on the workstation and log in as
3 Mount the PlateSpin Orchestrate 2.0 product ISO file to a temporary directory.
For example, if you copied the 32-bit version of the ISO file to
commands:
mkdir /mnt/iso
cd /Desktop
mount -o loop PlateSpin_Orchestrate-2.0.2.i386.iso /mnt/iso
cd /mnt/iso/SLE10
"Managing Virtual
Reference.
.
root
Machines" in the
PlateSpin
, enter the following
Desktop
Installation and Configuration
87
Advertisement
Table of Contents
