Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual page 31

PlateSpin Orchestrate Configuration Information
Table 2-1
Configuration
Explanation
Information
Orchestrate If you installed the Orchestrate Monitoring Server and the Orchestrate Monitoring
Monitoring Agent, the following questions are asked during the configuration process.
Monitored or Monitoring
Monitoring Server or a monitored node. Configure this host
as the Monitoring Server? (y/n)
Monitoring Server:
Monitoring Server.
Location:
location.
Type of Select whether this is a standard or high-availability server
Configuration configuration.
Default value =
Your answer here determines whether this is a standard installation or a High
Availability installation.
This section discusses standard installation, so specify
press Enter to accept the default. For more information about High Availability
configuration, see the
Guide.
: You can configure this host to be the
Default value = yes (if the Monitoring Server is installed on this machine)
This question always appears if you installed the Monitoring Server
component.
Because the configuration already knows that Orchestrate Monitoring is
installed, you are choosing whether the machine being installed to is to be
the controlling node for monitoring.
Specify the hostname or IP address of the
Default value = none
This question appears if you did not install the Monitoring Server on this
machine. It is the name or IP address of the server (also known as the
controlling node) where the Monitoring Agent will send its metrics.
Enter a name describing this monitored computer's
Default value = name_of_this_computer
This question always appears if you specify this computer as a monitored
node (that is, you answer
no
Monitoring Server).
The descriptive name you create here appears in the Monitoring user
interface as the location of the device.
standard
PlateSpin Orchestrate 2.0 High Availability Configuration
when asked if this machine is to be the
s (for
Installation and Configuration
standard ) or
31