Installing The Orchestrate Vm Client; Minimum Installation Requirements - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual

5 Launch the Orchestrate Development Client from
with the following command:
bin
./zoc
6 Select the Orchestrate Server grid object you want to log in to, then enter the username and
password for that server to connect to it.

2.5 Installing the Orchestrate VM Client

The PlateSpin Orchestrate VM Client program is installed on your Windows or Linux
administration machines. The interface is an Eclipse-based rich client environment designed to
allow you to create and manage virtual machines (VMs).
To install the VM Client, first fulfill the minimum requirements, then select the installation
platform:
Section 2.5.1, "Minimum Installation Requirements," on page 81
Section 2.5.2, "Installing the Orchestrate VM Client on the Windows Operating System," on
page 83
Section 2.5.3, "Installing Orchestrate VM Client in a Linux Environment," on page 87

2.5.1 Minimum Installation Requirements

To install the PlateSpin Orchestrate VM Client software, you must meet the following requirements:
"Host Servers for VM Repositories" on page 81
"Workstations for Running the VM Client Software" on page 82
"Uninstallation of Previous Versions of the Client" on page 82
Host Servers for VM Repositories
PlateSpin Orchestrate VM Client operates in conjunction with the PlateSpin Orchestrate Server
software, which provides the grid environment for creating, storing, and using VMs. For
information on installing PlateSpin Orchestrate Development Client for management of Orchestrate
Servers, see Section 2.4, "Installing the Orchestrate Development Client Only," on page
/opt/novell/zenworks/zos/clients/
Installation and Configuration
72.
81