Orchestrate Vm Client - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual

Host Operating System
SLES 10 SP2
Windows Server 2008 enabled
with Hyper-V
ESX 3.0.x/3.5.x
VMware Virtual Center
VMware Server

1.1.5 Orchestrate VM Client

The VM Client allows you to manage VMs in your enterprise. You can install the VM Client
interface on the following platforms:
VM Client Supported Operating Systems and Installation Files
Table 1-4
Operating System
SLES 10 SP2 (32-bit)
SLES 10 SP2 (64-bit)
SLES 11 or SLED 11 (32-bit)
SLES 11 or SLED 11 (64-bit)
Windows XP or Vista (32-bit or 64-bit)
14 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
Minimum Requirements
x86 or x86_64
2 GB RAM
30 GB Hard Drive Space
1GHz (x86 processor) or
1.4GHz (x64 processor)
512MB RAM
10 GB Hard Drive Space
*Subject to the VMWare support
matrix
*Subject to the VMWare support
matrix
*Subject to the VMWare support
matrix
Installation File
/i386/SLE10/nvmminst
/x86_64/SLE10/nvmminst
sles11/i386/SLE11/nvmminst
sles11/x86_64/SLE11/nvmminst
\Windows\nvmminst.exe
Recommended Hardware
x86 or x86_64
4+ GB RAM
100+ GB Hard Drive Space
2+ GHz
2+ GB RAM
40+ GB Hard Drive Space
*Subject to the VMWare support
matrix
*Subject to the VMWare support
matrix
*Subject to the VMWare support
matrix