Correcting Configuration Errors And Repeating The Configuration Process; Installing And Configuring The Orchestrate Server For Use With A Postgresql Audit Database On A Different Host - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual

Configuration
Explanation
Information
Configuration When you have completed the configuration process, you have the option of viewing
Summary a summary of the configuration information.
View summary:
Configuration information change:
1
This configuration parameter is considered an advanced setting for the Orchestrate Server in the
PlateSpin Orchestrate Configuration Wizard. If you select the Configure Advanced Settings check
box in the wizard, you have the option of changing the default values. If you leave the check box
deselected the setting is configured with normal defaults.
2
This configuration parameter is considered an advanced setting for the Orchestrate Server in the
PlateSpin Orchestrate Configuration Wizard. If you select the Configure Advanced Settings check
box in the wizard, this parameter is listed, but default values are provided only if the previous value
is manually set to no.
3
This configuration parameter is considered an advanced setting for the Orchestrate Agent in the
PlateSpin Orchestrate Configuration Wizard. If you select the Configure Advanced Settings check
box in the wizard, the setting is configured with normal defaults. Leaving the check box deselected
lets you have the option of changing the default value.
4
This configuration parameter is considered an advanced setting for the Orchestrate Agent in the
PlateSpin Orchestrate Configuration Wizard, but only if you set Provide Existing Orchestrate Server
Certificate to yes.
2.2.3 Correcting Configuration Errors and Repeating the
Configuration Process
If you want to reconfigure the components of a PlateSpin Orchestrate system that you previously
installed and configured, you can rerun the configuration script or the GUI Configuration Wizard
and change your responses during the configuration process.
2.2.4 Installing and Configuring the Orchestrate Server for Use
with a PostgreSQL Audit Database on a Different Host
When you install PlateSpin Orchestrate, you can optionally point it to a relational database that you
can use to audit the work done by the product. There is no relational database management system
bundled with the product, but because PlateSpin Orchestrate is supported by default on SLES 10
Do you want to view summary information?
Default = yes
Answering yes to this question displays a list of all the PlateSpin
Orchestrate components you have configured and the information with
which they will be configured.
Answering to this question starts the configuration program.
no
Default = no
Answering yes to this question restarts the configuration process so that
you can make changes to the configuration information.
Answering to this question starts the configuration program.
no
Do you want to make any changes?
Installation and Configuration 35