Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual page 53

JVMARGS="-Xmx256m -Xms256m -Xmn64m -XX:NewSize=64m -XX:MaxNewSize=64m"
The argument specifies the maximum heap size for the JVM. Increasing the heap
-Xmx
size prevents a JVM out of memory condition.
8c Change the value in the
Using the ISO to Install the PlateSpin Orchestrate 2.0.2 Agent on SLED and SLES 11
Machines
PlateSpin Orchestrate 2.0.2 provides a separate ISO designated for SUSE Linux Enterprise Desktop
SLED 11 and SLES 11 installations of the PlateSpin Orchestrate Agent and Client.
Installation on SLED/SLES 11 is supported for the PlateSpin Orchestrate Agent and PlateSpin
Orchestrate Clients only. Neither the PlateSpin Orchestrate Server nor the PlateSpin Orchestrate
Monitoring Server are supported on SLED/SLES 11
NOTE: The Orchestrate Agent is also supported on SLES 9 SP3, SLES 10 SP1, SLES 10 SP2. For
more information, see "Using the ISO to Install the Orchestrate Agent on SLES 9.x and 10.x
Machines" on page 46.
Use the following procedure if you want to use the Add-on CD method to install just the PlateSpin
Orchestrate 2.0.2 Agent to a SLED 11 or SLES 11 machine.
1 To verify that the device where you want to install the agent and client software fulfills the
necessary requirements, review
page 9.
2 Download the appropriate PlateSpin Orchestrate Server SLES 11 ISO (32-bit or 64-bit) to an
accessible network location.
3 (Optional) Create a DVD ISO (32-bit or 64-bit) that you can take with you to the machine
where you want to install it.
4 Install PlateSpin Orchestrate Agent software:
4a Log in to the target SLES 11 server or SLED 11 desktop machine as
YaST2.
4b In the YaST Control Center, click Software, then click Add-on Product to display the Add-
on Product Media dialog box.
4c In the Add-on Product Media dialog box, select the ISO media (Local Directory or DVD)
to install:
(Conditional) Select DVD, click Next, insert the DVD, then click Continue.
(Conditional) Select Local Directory, click Next, select the ISO Image check box,
browse to and select the ISO in the file system, then click OK.
(Conditional) Select Local ISO image, click Next, enter the repository name of the
ISO image, browse to the location of the ISO image, then click Next.
4d Read and accept the license agreement, then click Next to display YaST2.
4e In YaST2, click the Filter drop-down menu, then select Patterns to display the install
patterns available on the PlateSpin Orchestrate ISO.
argument from 256 MB to 512 MB.
-Xmx
Chapter 1, "Planning the Orchestrate Server Installation," on
, then open
root
Installation and Configuration 53