Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual page 17

Hide thumbs Also See for PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009:
Table of Contents

Advertisement

PlateSpin
Supported Operating
Orchestrate
System
Component
Orchestrate
SLES 9 SP3 (32-
Agent
bit or 64-bit)
SLES 10 SP1
(32-bit or 64-bit)
SLES 10 SP2
(32-bit or 64-bit)
SLES 11 (32-bit
or 64-bit)
RHEL 4 (32-bit or
64-bit)
RHEL 5 (32-bit or
64-bit)
Windows Server
2003 (32-bit or
64-bit)
Windows Server
2008 (32-bit or
64-bit)
VMware ESX
3.0.x
VMware ESX
3.5.x
Installation Method and Source
Available as an RPM package distribution (ISO images, 32-
bit or 64-bit) from the
download.novell.com)
license key. Uses the Add-On CD installation (PlateSpin
Orchestrate Agent pattern) available in YaST.
For installation details, see
Configuring All PlateSpin Orchestrate Components
Together," on page
21.
NOTE: YaST installation is supported only on SLES 10 and
SLES 11, not on RHEL platforms or SLES 9. For these last
two platforms, use either the RPMs located on the ISO
(found in the RHEL or SLES9 directories) or use the
that you can download from the Administrator Information
page. See
Section 2.3, "Installing the Orchestrate Agent
Only," on page
45.)
After Orchestrate Server installation, available from the
server through a downloadable installation script (
from the Administrator Information page (port 8001) or run
as a post-install from the ISO image.
For installation details, see
Orchestrate Agent Only," on page
After Orchestrate Server installation, available from the
server through a downloadable installation script (
from the Administrator Information page (port 8001) or run
as a post-install from the ISO image.
For installation details, see
Orchestrate Agent Only," on page
After Orchestrate Server installation, available as a
downloadable GUI installation program (
Administrator Information page (port 8001).
For installation details, see
Orchestrate Agent on Windows Machines" on page 60
Section 2.3, "Installing the Orchestrate Agent Only," on
page
45.
Available as an RPM package distribution (ISO images, 32-
bit or 64-bit) from the
download.novell.com)
license key. Uses the Add-On CD installation (PlateSpin
Orchestrate Agent pattern) available in YaST.
For installation details, see
Configuring All PlateSpin Orchestrate Components
Together," on page
21.
After Orchestrate Server installation, available from the
server through a downloadable RPM from the Administrator
Information page (port 8001) or run as a post-install from the
ISO image.
For installation details, see
Orchestrate Agent Only," on page
Novell Downloads Web site (http://
after purchase and receipt of a
Section 2.2, "Installing and
Section 2.3, "Installing the
45.
Section 2.3, "Installing the
45.
file) from the
.exe
"Using the ISO to Install the
Novell Downloads Web site (http://
after purchase and receipt of a
Section 2.2, "Installing and
Section 2.3, "Installing the
45.
Planning the Orchestrate Server Installation
.sh
file
.sh
file)
file)
.sh
in
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Platespin orchestrate 2.0.2

Table of Contents