Table of Contents
Advertisement
Installing Agents
11. Click Finish to exit the wizard.
Installing the Agent for Linux, UNIX, Mac, and Netware
Prior to installing the Agent, you must ensure that the currently installed Java version meets the
requirements defined under
After ensuring the computer contains an appropriate version of Java, complete the following steps to
install the Agent.
To Install the Linux, Unix, Mac, and Netware Agents
1.
In the /root directory, create a UpdateAgent directory.
2.
From the downloaded location (refer to
UnixUpdateAgent.tar file, and extract the file's contents to:
/root/UnixUpdateAgent
3.
Open a Terminal Window (Main Menu > System Tools > Terminal).
4.
Navigate to the /root/UnixUpdateAgent/ directory.
5.
Type ./install to start the installation process.
6.
At the Enter the Directory where ZENworks Patch Management Agent should be installed
[/usr/local]: prompt, type the desired installation path or press ENTER to accept the default path
of /usr/local.
Note: The Enter the Directory... prompt identified in step 6 does not apply to the
Netware installation.
"Supported Operating Systems (Update Agent)"
Figure 2.18 UnixUpdateAgent directory
"Downloading the
Installer") select the
- 18 -
Advertisement
Table of Contents
