Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual page 55

i) install
u) upgrade
- - - - - -
Selection [install]:
6d Press Enter to select the default (install) and display the following text, depending on
which components you installed previously:
Select products to configure
# selected
1) no
2) no
3) yes
4) no
Select from the following:
1 - 4) toggle selection status
a) all
n) none
f) finished making selections
q) quit -- exit the program
Selection [finish]:
6e Type f and press Enter to finish the selection of the Orchestrate Agent (for this example,
only the Orchestrate Agent is installed).
6f Specify the name of the Orchestrate Agent on this node, then press Enter.
6g Specify the hostname or IP address of the Orchestrate Server, then press Enter.
6h Specify (yes or no) whether you want to use a certificate for verifying communication,
then press Enter.
6i Specify (yes or no) whether this is a virtual machine, then press Enter.
6j Specify the port on the Orchestrate Server that you want to use for communication
between this Agent and the Server, then press Enter.
6k (Optional) Specify a local bind address for the Agent, then press Enter.
6l Verify the configuration summary information, specify whether changes are needed, then
(when all changes are made) press Enter to begin the configuration.
7 (Conditional) If you use the GUI Configuration Wizard, run it as follows:
7a Make sure the product ISO is accessible. The script copies some files from the ISO.
7b Make sure you are logged in as
7c Run the wizard:
/opt/novell/zenworks/orch/bin/guiconfig
Item
PlateSpin Orchestrate Monitoring Service (not installed)
PlateSpin Orchestrate Server (not installed)
PlateSpin Orchestrate Agent
PlateSpin Orchestrate VM Builder (not installed)
to run the configuration wizard.
root
Installation and Configuration 55