Upgrading The Zenworks Vm Manager Console To Platespin Orchestrate Vm Client; Running The Upgrade Configuration On An Enterprise Scale; Upgrading A Zenworks Orchestrator 1.3 High Availability Configuration - Novell PLATESPIN ORCHESTRATE 2.0.2 - UPGARDE GUIDE 10-09-2009 Upgrade Manual

2.6 Upgrading the ZENworks VM Manager
Console to PlateSpin Orchestrate VM Client
If you installed the ZENworks Orchestrator VM Manager console, the new version (PlateSpin
Orchestrate VM Client) must be installed in its place. There is no upgrade option for this
component.
To install the new client, you must do the following:
1 Before upgrading ZENworks Orchestrator to PlateSpin Orchestrate, check out all of the VMs
from the Warehouse, then perform that upgrade (see
Orchestrator Server Components," on page
VMs that are checked in to the Warehouse cannot be recovered in PlateSpin Orchestrate. They
must be checked out before upgrading in order for them to be discoverable in VM Client.
2 Uninstall the ZENworks VM Manager client:
Windows: Click Start > Control Panel > Add or Remove Programs, select the ZENworks
Orchestrator VM Manager item, then click Remove.
Linux: Run the following command:
/opt/novell/zenworks/vmmanagement/Uninstall_ZENworks_VMM/
Uninstall_ZENworks_Orchestrator_VM_Manager_1.3.0
3 Follow the steps in
Installation and Configuration Guide
2.7 Running the Upgrade Configuration on an
Enterprise Scale
If you have a number of ZENworks Orchestrator Server components or ZENworks Orchestrator
Agent components to upgrade in an enterprise environment, you might want to follow these general
steps to accomplish the upgrade.
1 Use a reputable configuration management tool to distribute and install the upgrade software.
Examples include ZENworks Linux Management, ZENworks Configuration Management, and
the Red Hat Network*.
2 Configure the upgraded components on a base machine, then, use the configuration software to
distribute the respective
2.8 Upgrading a ZENworks Orchestrator 1.3 High
Availability Configuration
This section provides an example of upgrading a ZENworks Orchestrator 1.3 high availability
configuration to a PlateSpin Orchestrate 2.0 high availability configuration with the following
details:
Two ZENworks Orchestrator Servers
c114
c115
One additional server (c122) with the following Orchestrator components installed
48 PlateSpin Orchestrate 2.0 Upgrade Guide
15).
"Installing the Orchestrate VM
to install the new client.
files to the servers or nodes being upgraded.
.conf
Section 2.1, "Upgrading the ZENworks
Client" in the PlateSpin Orchestrate 2.0