Stopping And Starting The Platespin Orchestrate Server; Stopping And Starting The Platespin Orchestrate Agent - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual

3.10.1 Stopping and Starting the PlateSpin Orchestrate Server

You can use the following methods for stopping and starting the PlateSpin Orchestrate Server.
"Stopping the Server" on page 123
"Starting the Server" on page 123
Stopping the Server
You need to shut down the Orchestrate Server before you power off the computer where it is
running. This routine prevents possible data corruption.You must be logged in to an Orchestrate
Server in order to stop it. There are two methods to stop the current server:
If you are in the PlateSpin Orchestrate Development Client, click Server > click Shutdown
ZOS.
If you are at the command line, enter the following command:
/etc/init.d/novell-zosserver stop
Starting the Server
The PlateSpin Orchestrate installation and configuration automatically starts the Orchestrate Server.
The Orchestrate Server must be stopped before you can start it. You must be logged in to an
Orchestrate Server to start it. There are two methods you can use to start the current server:
If you are at the command line, enter the following command:
/etc/init.d/novell-zosserver start
To restart the Orchestrate Server from the command line, enter the following command:
/etc/init.d/novell-zosserver restart
This command stops the server before restarting it.

3.10.2 Stopping and Starting the PlateSpin Orchestrate Agent

You can use the following methods for stopping and starting the PlateSpin Orchestrate Agent.
"Stopping the Agent" on page 123
"Starting the Agent" on page 124
Stopping the Agent
There are several methods you can use to stop the agent:
If you are in the PlateSpin Orchestrate Development Client, select the Resources Monitor,
select a resource, then click the red icon in the work area to shut down that agent.
If you are running the agent on a Windows machine, click Start > Programs > Novell > ZOS >
Agent > Shutdown ZOS Agent.
If you are at the Linux bash prompt, enter the following command:
/etc/init.d/novell-zosagent stop
First Use of Basic PlateSpin Orchestrate Components 123