Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual page 61

This URL is the DNS name (or IP address) of the server for PlateSpin Orchestrate. Be sure to use
Port 8001 in the address to access and display the page, as shown in the following illustration:
The page includes links to information for PlateSpin Orchestrate administrators, including product
documentation and the installers for the PlateSpin Orchestrate Development Client and the
PlateSpin Orchestrate Agent.
This section includes the following information about installing the Orchestrate Agent from the
Administrator Information page:
"Installing and Registering the SLES PlateSpin Orchestrate Agent from the Administrator
Information page." on page 61
"Installing and Registering the Windows PlateSpin Orchestrate Agent from the Administrator
Information Page" on page 63
"Installing and Registering the PlateSpin Orchestrate Agent on an ESX Machine from the
Administrator Information Page" on page 66
Installing and Registering the SLES PlateSpin Orchestrate Agent from the
Administrator Information page.
PlateSpin Orchestrate requires computing resources in order to run applications. The PlateSpin
Orchestrate Agent must be installed on each managed device to add that computing resource to the
grid where the Orchestrate Server can manage it.
Use the following steps to install the agent on a SLES 9 SP3, SLES 10 SP1, SLES 10 SP2, RHEL 4
or RHEL 5 computing resource:
1 From the managed resource desktop, launch a browser to access the Web page for PlateSpin
Orchestrate, as described above.
2 Scroll to the Installation section of the page:
Installation and Configuration 61