Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual page 112

There are three methods you can use to deploy a job:
Deploy from the PlateSpin Orchestrate Development Client by right-clicking the Jobs
container in the Explorer panel.
Deploy from the PlateSpin Orchestrate Development Client by selecting the Actions menu in
the Development Client.
Deploy from the
For this walkthrough, we will deploy a simple job developed for PlateSpin Orchestrate customers to
demonstrate how jobs are deployed and run. Although the walkthrough shows only the first method
for deploying, the other methods are relatively simple, so no further explanation is provided.
1 In the Explorer panel of the PlateSpin Orchestrate Development Client, right-click the Jobs
object, then click Deploy Job to open the Select the Component File to Deploy dialog box.
2 Open the Look In drop-down list, then navigate to the location of the job you want to deploy.
Although a job developer can store PlateSpin Orchestrate jobs at any location on the network,
the sample jobs shipped with PlateSpin Orchestrate are limited to the directories where the
product is installed. For this walkthrough, navigate to the
server/examples
3 Select
The whoami job appears in the all container and in the examples container in the tree.
When deployed, the job is sent over the wire to the Orchestrate Server with which it is
associated. It is persisted there until undeployed.
112 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
command line (
zosadmin
directory.
, then click OK to deploy the job to the Jobs container.
whoami.job
zosadmin deploy path_to_job
/opt/novell/zenworks/zos/
).