Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual page 71

5 Use the
command to download and install any missing dependencies.
up2date
For example, if you are missing
$ up2date --solvedeps=libcap.so, libcap.so.1
6 Run the configuration script:
$ /opt/novell/zenworks/orch/bin/config
See Table 2-1 on page 31
RHEL 5
To install the five packages of the Orchestrate Agent on RHEL 5:
1 Download the pertinent 32-bit or 64-bit Add-On ISO from the DVD.
2 Mount the ISO as a loopback device.
If you are mounting a 64 bit ISO, the command is:
$ mount -o loop PlateSpin_Orchestrate-2.0.2.x86_64.iso /mnt
3 Change your working directory to the location of the RHEL package:
$ cd /mnt/RHEL5
4 Use the package manager included in RHEL to install the Orchestrate Agent packages.
(Missing dependencies are met by using RHN):
$ yum localinstall *.rpm
5 Run the configuration script:
$ /opt/novell/zenworks/orch/bin/config
See Table 2-1 on page 31
SLES 9
To install the five packages of the Orchestrate Agent on SLES 9:
1 Download the pertinent 32-bit or 64-bit Add-On ISO from the DVD.
2 Mount the ISO as a loopback device.
If you are mounting a 64-bit ISO, the command is:
$ mount -o loop PlateSpin_Orchestrate-2.0.2.x86_64.iso /mnt
3 Change your working directory to the location of the SLES 9 package:
$ cd /mnt/SLES9
4 Use the
command to install the packages:
rpm
$ rpm -Uvh *.rpm
5 Use the command to download and install any missing dependencies.
up2date
For example, if you are missing
$ up2date --solvedeps=libcap.so, libcap.so.1
6 Run the configuration script:
$ /opt/novell/zenworks/orch/bin/config
See Table 2-1 on page 31
and
libcap.so libcap.so.1
for an explanation of the configuration for the Orchestrate Agent.
for an explanation of the configuration for the Orchestrate Agent.
and
libcap.so libcap.so.1
for an explanation of the configuration for the Orchestrate Agent.
, you would enter:
, you would enter:
Installation and Configuration 71