Starting And Stopping The Platespin Orchestrate Development Client - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual

Starting the Agent
To start the PlateSpin Orchestrate Agent from a Windows machine, double-click the ZOS Agent
shortcut on your desktop or click Start > Programs > Novell > ZOS > Agent > Start ZOS Agent.
If you are at the Linux bash prompt, enter the following command:
/etc/init.d/novell-zosagent start
3.10.3 Starting and Stopping the PlateSpin Orchestrate
Development Client
You can use the following methods for stopping and starting the PlateSpin Orchestrate Development
Client.
"Stopping the Orchestrate Development Client" on page 124
"Starting the Orchestrate Development Client" on page 124
Stopping the Orchestrate Development Client
To stop the PlateSpin Orchestrate Development Client at the Development Client itself, click File >
Exit, or click the shutdown icon on the Development Client window.
Starting the Orchestrate Development Client
To start the Orchestrate Development Client from a Linux machine: enter .
On a SLES 10 machine, if you have installed the Orchestrate Server along with the Orchestrate
Development Client, change to
following command
./zoc
On a SLES 10 machine, if you have installed the Orchestrate Development Client alone,
change to
./zoc
To start the Orchestrate Development Client on a Windows machine, double-click the ZOS Clients
shortcut on your desktop or click Start > Programs > Novell > ZOS > Clients > PlateSpin
Orchestrate Development Client.
124 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
/opt/novell/zenworks/zos/server/bin
/opt/novell/zenworks/zos/clients/bin
.
/zoc
and enter the
and enter the following command