Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual page 100

Those who use the Orchestrate Development Client are the job developer, who uses the tools in the
Development Client to create and debug jobs, and the PlateSpin Orchestrate administrator
(sometimes called the grid administrator), who oversees job deployment and overall PlateSpin
Orchestrate usage.
To launch the Development Client:
1 Navigate to the location where the Development Client was installed.
SLES 10 SP2: Change to the following directory:
/opt/novell/zenworks/zos/server/bin
Windows: In the Start menu, click Programs > Novell > ZOS > Clients.
2 Launch the Development Client.
SLES 10 SP2: Use the following command to launch the Orchestrate Development
Client:
./zoc
Windows: In the Start menu, click Programs > Novell > ZOS > Clients submenu, click
ZOS Management Console.
When the Orchestrate Development Client is launched, it broadcasts throughout the network to
discover all of the PlateSpin Orchestrate Servers that have been previously installed. The server or
servers are displayed at the root of the Explorer panel in the Development Client.
Figure 3-1
NOTE: PlateSpin Orchestrate Server discovery by the Development Client might not find and
display Orchestrate Servers that are installed on virtual machines; the Development Client can only
discover servers on a broadcast-capable network.
To begin using the Development Client, you first need to log in to an Orchestrate Server. To
understand and continue with the server login process, see
the PlateSpin Orchestrate Server," on page
100 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
PlateSpin Orchestrate Development Client After First Launch
Section 3.2, "Walkthrough: Logging In to
101.