Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual page 27

The components page lists the PlateSpin Orchestrate components that are available for
configuration. By default, all installed components are selected for configuration.
7e Click Next to confirm the components you want to install.
or
Deselect any PlateSpin Orchestrate components that you do not want to configure, then
click Next.
(Conditional) If you selected the PlateSpin Orchestrate Monitoring Service as a
component to install, the Monitoring Service Configuration page is displayed.
See Step 7e1 to continue.
(Conditional) If you did not select the PlateSpin Orchestrate Monitoring Service as a
component to install, the High Availability configuration page is displayed.
See Step 7f to continue.
7e1 (Conditional) Specify a name for this monitored node. The default name is the
computer name.
Select the Configure this computer check box if you want this computer to be a
Monitoring Server, then click Next and continue with Step 7f.
Installation and Configuration 27