Table of Contents
Advertisement
Preinstalling the SSL VPN Client
6
Components
You can preinstall SSL VPN client components in the client machine, so that the users can access
SSL VPN in Enterprise mode.
Section 6.1, "Installing Client Components for Linux," on page 53
Section 6.2, "Installing Client Components for Macintosh," on page 53
Section 6.3, "Installing Client Components for Windows," on page 53
6.1 Installing Client Components for Linux
1 On the client machine, download the following RPM from the
webapps/sslvpn/linux
novell-sslvpn-serv.tar.gz
2 Enter the following command to untar the file:
tar -zxvf <filename>
3 Enter the following command to install
rpm -ivh <rpm_name>
6.2 Installing Client Components for Macintosh
1 On the client machine, download the following package from the
tomcat4/webapps/sslvpn/MacOS
novell-sslvpn-serv.tar.gz
2 Enter the following command to untar the file:
tar -zxvf novell-sslvpn-serv.tar.gz
3 Enter the following command to install the
from the tar ball:
installer -pkg novl-sslvpn-service.pkg -target
6.3 Installing Client Components for Windows
1 On the client machine, download the following file from
webapps/sslvpn/windows
novl-sslvpn-service-install.exe
2 Run the
file to install the client components.
.exe
directory:
novl-sslvpn-service-xxx-xx.i586.rpm
directory:
novl-sslvpn-service.pkg
:
/var/opt/novell/tomcat4/
/var/opt/novell/
package extracted
"/"
/var/opt/novell/tomcat4/
Preinstalling the SSL VPN Client Components
6
:
53
Advertisement
Chapters
Table of Contents
Troubleshooting
