Platespin Orchestrate Configuration Information - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual

IMPORTANT: When the installation and configuration are complete, you need to
register the resources to be managed by the PlateSpin Orchestrate system. Please refer to
Chapter 3, "First Use of Basic PlateSpin Orchestrate Components," on page 99
detailed information about getting resources to manage in the PlateSpin Orchestrate
system.
8 Open the configuration log file (
to make sure that the components were correctly configured.
You might want to change the configuration if you change your mind about some of the
parameters you provided in the configuration process. For information about what to do in
these circumstances, see
Configuration Process," on page
9 Access the PlateSpin Orchestrate Administrator Information Page to verify that the Orchestrate
Server is installed and running. Use the following URL to open the page in a Web browser:
http://DNS_name_or_IP_address_of_Orchestrate_Server:8001
The Administrator Information page includes links to separate installation programs (installers)
for the PlateSpin Orchestrate Agent and the PlateSpin Orchestrate Clients. The installers are
used for various operating systems. You can download the installers and install the agent or the
clients on any supported machine you choose. For more information, see
"Installing the Orchestrate Agent Only," on page
10 (Conditional and Optional) If you installed the PlateSpin Orchestrate Clients, you can increase
the heap size that the JVM* handles. This enables the console to manage a larger number of
objects.
10a Open the
On Microsoft* Windows*, the path to the console is
files\novell\zos\clients\bin\zoc.bat
"Installing the Orchestrate Agent Only," on page
10b Inside the script, find the following line where the JVM parameters are defined:
JVMARGS="-Xmx256m -Xms256m -Xmn64m -XX:NewSize=64m -XX:MaxNewSize=64m"
The
size prevents a JVM out of memory condition.
10c Change the value in the

2.2.2 PlateSpin Orchestrate Configuration Information

The following table describes the information required by the PlateSpin Orchestrate configuration
( ) and the configuration wizard (
config
readily available if you want to evaluate the entire product. The information is listed in the order that
it is presented in the configuration file.
30 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
/var/opt/novell/novell_zenworks_orch_install.log
Section 2.2.3, "Correcting Configuration Errors and Repeating the
35.
bash shell script at
zoc
argument specifies the maximum heap size for the JVM. Increasing the heap
-Xmx
-Xmx
45.
/opt/novell/zenworks/zos/server/bin
. For more information, see
45.
argument from 256MB to 512MB.
). The information is organized to make it
guiconfig
for
)
Section 2.3,
.
Section 2.3,