Walkthrough: Using The Zosadmin Command To Gather Information; Stopping And Starting Platespin Orchestrate Components - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual

You now have a basic understanding of the Server Portal and how to use it to verify that a job has
run. As the last experiment in the walkthrough for PlateSpin Orchestrate, you can use the
command line to gather information about your system. For more information, see
"Walkthrough: Using the zosadmin Command to Gather Information," on page
3.9 Walkthrough: Using the zosadmin Command
to Gather Information
You can use the
Orchestrate system. Follow these steps to learn about the users and nodes in your system.
1 Log in to the PlateSpin Orchestrate system by using the following command:
zosadmin login
You can also use the server's host name as an argument when you log in.
If you use the grid= parameter, you can specify the grid name you want to log into. If other
Orchestrate Servers are installed on the local host, the system cannot log in to any of them
unless you use this parameter. For more information, see
in the
2 Enter the administrator's user name and password.
If the login was successful, the command line tool returns a message like this:
Logged into tszen4_grid on server 'tszen4.provo.novell.com'
3 Enter the following command to list the active users on your PlateSpin Orchestrate system:
zosadmin users
You can add the
command.
4 Enter the following command to list the active nodes on your PlateSpin Orchestrate system:
zosadmin nodes
You can add the
command.
With the completion of this part of the walkthrough, you have a good understanding of the parts of
PlateSpin Orchestrate and how they work. If you want more information about the details of the
PlateSpin Orchestrate Development Client, see the
Reference. If you want to learn about the job manager's role, see the
Server Portal ReferencePlateSpin Orchestrate 2.0 Developer Guide and
3.10 Stopping and Starting PlateSpin
Orchestrate Components
Use the following methods for stopping and starting PlateSpin Orchestrate components.
Section 3.10.1, "Stopping and Starting the PlateSpin Orchestrate Server," on page 123
Section 3.10.2, "Stopping and Starting the PlateSpin Orchestrate Agent," on page 123
Section 3.10.3, "Starting and Stopping the PlateSpin Orchestrate Development Client," on
page 124
122 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
command line to learn what users or nodes are defined in your PlateSpin
zosadmin
PlateSpin Orchestrate 2.0 Command Line
option at the command line to determine the run options for this
--help
option at the command line to determine the run options for this
--help
"The zosadmin Command Line
Reference.
PlateSpin Orchestrate 2.0 Administrator
PlateSpin Orchestrate 2.0
Reference.
zosadmin
Section 3.9,
122.
Tool"