Logging In As Default - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual

2 In the dialog box, specify the IP address of the Orchestrate Server in the Server Address field,
then click OK to display the login dialog box.
3 Specify the administrator name (created during the install) in the Username field, specify the
administrator password in the Password field, then click OK to log in to the server.

3.2.3 Logging In As Default

If you want to save time during login, you can set a login preference to prepopulate the administrator
username and password. Use the following steps to set the preference and log in as default.
1 From the Development Client, click Edit, then click Preferences to display the Orchestrate
Development Client Preferences dialog box.
2 In this dialog box, click the Server tab to display the Server page.
3 In the Server Login section of the page, specify the administrator username in the Default
Username field, then specify the administrator password in the Default Password field.
4 Select the Use as Default Login check box, then click OK.
The next time you log in, either to an explicit, named server or by exploring the PlateSpin
Orchestrate grid, the default login dialog box is displayed.
Figure 3-2
102 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
Default Login Dialog Box