Installation And Configuration Steps - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual

The VM Builder cannot be installed on a VM and must only be installed on the host operating
system of the VM Builder node. Multiple servers with VM host capability can be used as VM
Builder machines to make the VM Builder group.
This section includes the following information:
Section 2.2.1, "Installation and Configuration Steps," on page 22
Section 2.2.2, "PlateSpin Orchestrate Configuration Information," on page 30
Section 2.2.3, "Correcting Configuration Errors and Repeating the Configuration Process," on
page 35
Section 2.2.4, "Installing and Configuring the Orchestrate Server for Use with a PostgreSQL
Audit Database on a Different Host," on page 35
Section 2.2.5, "Installing and Configuring the Orchestrate Server for Use with a Local
PostgreSQL Audit Database," on page 40
Section 2.2.6, "Configuring the Audit Database After PlateSpin Orchestrate Is Configured," on
page 43
Section 2.2.7, "Configuring the Remote Audit Database after PlateSpin Orchestrate Is
Configured," on page 44
Section 2.2.8, "Modifying Audit Database Tables to Accommodate Long Names," on page 44

2.2.1 Installation and Configuration Steps

To install and configure a complete PlateSpin Orchestrate system (except the VM Client) on a SLES
machine:
1 Review
device where you want to install the Orchestrate Server software fulfills the necessary
requirements.
2 Download the appropriate PlateSpin Orchestrate Server ISO (32-bit or 64-bit) to an accessible
network location.
3 (Optional) Create a DVD ISO (32-bit or 64-bit) that you can take with you to the machine
where you want to install it.
4 Install PlateSpin Orchestrate software:
4a Log in to the target SLES 10 SP2 server as
4b In the YaST Control Center, click Software, then click Add-on Product to display the Add-
on Product Media dialog box.
4c In the Add-on Product Media dialog box, select the ISO media (Local Directory or DVD)
to install.
4c1 (Conditional) Select DVD, click Next, insert the DVD, then click Continue.
4c2 (Conditional) Select Local Directory, click Next, select the ISO Image check box,
4d Read and accept the license agreement, then click Next to display YaST2.
4e In YaST2, click the Filter drop-down menu, then select Patterns to display the install
patterns available on the PlateSpin Orchestrate ISO.
22 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
Chapter 1, "Planning the Orchestrate Server Installation," on page 9
browse to ISO on the file system, then click OK.
, then open YaST2.
root
to verify that the