Verification At The Jobs Monitor - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual

Job Status for userA.whoami.60
------------------------------
State: Completed
Resource Count: 0
Percent Complete: 100%
Queue Pos: n/a
Child Job Count: 0
Joblet Counts: 1 (0)
Instance Name: whoami
Job Type: whoami
Memo:
Priority: medium
Arguments: resource=tszen4_agent
Submit Time: 12/24/2008 02:35:38
Delayed Start: n/a
Start Time: 12/24/2008 02:35:38
End Time: 12/24/2008 02:35:39
Elapsed Time: 0:00:00
Queue Time: 0:00:00
Pause Time: 0:00:00
Total CPU Time: 0:00:00
Total GCycles: 0:00:00
Total Cost: $0.0002
Burn Rate: $0.8982/hr
Termination Type: n/a
Job Error: <none>
Joblet Error Count: 0
Node Error Count: 0
Excluded Nodes: 0
Bad Provision Count: 0
Excluded Provisions: 0
zos log job_id --verbose
If you know the Job ID for a particular job that has run, you can use the
command to display its detailed job log. Running this command yields an output like this:
verbose
Agent connected with ID: user_userA_64 (comms ok), Session ID: 52
Launching 1 joblets for user 'userA'
[tszen4_agent] cmd=whoami
[tszen4_agent] root
[tszen4_agent] result=0
Agent ID: null logged out.

3.8.2 Verification at the Jobs Monitor

If you want to use the PlateSpin Orchestrate Development Client to verify that the job has run, you
can open the Jobs Monitor to look at the Job Log and see the result of the job being run.
1 In the Development Client, click Jobs in the main toolbar to open the Jobs Monitor view.
2 In the Jobs Monitor view, click the Job Log tab to open the Jobs page in the workspace panel.
(0 this job)
(0 this job)
(1 (0/0/1/0/0) this job)
(0:00:00 this job)
(0:00:00 this job)
($0.0002 this job)
($0.8982/hr this job)
(0 this job)
(0 this job)
(0 this job)
(0 this job)
(0 this job)
First Use of Basic PlateSpin Orchestrate Components 119
zos log job_id --