Fluke 5500A Operator's Manual page 242

5500A
Operator Manual
UUT_SET
(UUT Serial Port Set command) Set the RS-232-C settings for the 5500A Calibrator
rear panel SERIAL 2 TO UUT serial port, which is saved in the 5500A non-volatile
memory. (While saving configuration data in the non-volatile memory, a period of about
2 seconds, the 5500A does not respond to remote commands.) (To set the parameters for
the rear panel SERIAL 1 FROM HOST serial port, see the SP_SET command.) The
factory default values are shown below in bold type. (To return to the factory defaults,
see the FORMAT SETUP command.)
The interface selection sets the command response, with command echo back with
TERM (terminal) and no echo back with COMP (computer).
Parameters:
Example:
Set the parameters for the rear panel SERIAL 2 TO UUT serial port to the factory
default values.
UUT_SET?
(UUT Serial Port Set query) Return the RS-232-C settings for the 5500A Calibrator rear
panel SERIAL 2 TO UUT serial port. (To return the parameters for the rear panel
SERIAL 1 FROM HOST serial port, see the SP_SET? command.) The factory default
values are shown below in bold type. (To return to the factory defaults, see the FORMAT
SETUP command.)
Responses:
Example:
Return the parameters for the rear panel SERIAL 2 TO UUT serial port, as shown, when
set to the factory default values.
6-46
x x
IEEE-488 RS-232
<baud rate value>,
<flow control>,
<number data bits>,
<number stop bits>, SBIT1 (1 bit) or SBIT2 (2 bits)
<parity>
UUT_SET 9600,XON,DBIT8,SBIT1,PNONE
x x
IEEE-488 RS-232
<baud rate value>,
<flow control>,
<number data bits>,
<number stop bits>, SBIT1 (1 bit) or SBIT2 (2 bits)
<parity>
UUT_SET? returns 9600,XON,DBIT8,SBIT1,PNONE
x x
Sequential Overlapped
300, 600, 1200, 2400, 4800, 9600
XON (xon/xoff), NOSTALL (none), RTS (rts/cts)
DBIT7 (7 bits) or DBIT8 (8 bits)
PNONE (none), PODD (odd),PEVEN (even)
x x
Sequential Overlapped
300, 600, 1200, 2400, 4800, 9600
XON (xon/xoff), NOSTALL (none), RTS (rts/cts)
DBIT7 (7 bits) or DBIT8 (8 bits)
PNONE (none), PODD (odd),PEVEN (even)
x
Coupled
x
Coupled