Base Profiles; Configuring The Adp Profile Summary Screen - ZyXEL Communications ZYWALL USG 20 Manual

29.3.1 Base Profiles

The ZyWALL comes with base profiles. You use base profiles to create new
profiles. In the Configuration > Anti-X > ADP > Profile screen, click Add to
display the following screen.
Figure 289 Base Profiles
These are the default base profiles at the time of writing.
Table 134 Base Profiles
BASE
PROFILE
none
all
OK
Cancel

29.3.2 Configuring The ADP Profile Summary Screen

Select Configuration > Anti-X > ADP > Profile.
Figure 290 Configuration > Anti-X > ADP > Profile
ZyWALL USG 20/20W User's Guide
DESCRIPTION
All traffic anomaly and protocol anomaly rules are disabled. No logs are
generated nor actions are taken.
All traffic anomaly and protocol anomaly rules are enabled. Rules with a
high or severe severity level (greater than three) generate log alerts
and cause packets that trigger them to be dropped. Rules with a very
low, low or medium severity level (less than or equal to three) generate
logs (not log alerts) and no action is taken on packets that trigger them.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
Chapter 29 ADP
471