Chapter 31 IDP
Table 151 Anti-X > IDP > General > Add (continued)
LABEL
IDP Profile
OK
Cancel
31.3 Introducing IDP Profiles
An IDP profile is a set of packet inspection signatures.
Packet inspection signatures examine packet content for malicious data. Packet
inspection applies to OSI (Open System Interconnection) layer-4 to layer-7
contents. You need to subscribe for IDP service in order to be able to download
new signatures.
In general, packet inspection signatures are created for known attacks while
anomaly detection looks for abnormal behavior (see
information on anomaly detection).
31.3.1 Base Profiles
The ZyWALL comes with several base profiles. You use base profiles to create new
profiles. In the Anti-X > IDP > Profile screen, click the Add icon to display the
following screen.
Figure 375 Base Profiles
516
DESCRIPTION
Select an IDP profile to apply to the entry's traffic direction.
Configure the IDP profiles in the IDP profile screens.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
Chapter 32 on page 545
ZyWALL USG 300 User's Guide
for