ZyXEL Communications ZYWALL USG 20 Manual page 692

Chapter 44 Log and Report
Table 214 Configuration > Log & Report > Log Setting > Active Log Summary
LABEL
System log
E-mail Server
1 E-mail
E-mail Server
2 E-mail
Remote Server
1~4
OK
Cancel
692
DESCRIPTION
Select which events you want to log by Log Category. There are three
choices:
disable all logs (red X) - do not log any information from this category
enable normal logs (green checkmark) - create log messages and
alerts from this category
enable normal logs and debug logs (yellow check mark) - create log
messages, alerts, and debugging information from this category; the
ZyWALL does not e-mail debugging information, however, even if this
setting is selected.
Select whether each category of events should be included in the log
messages when it is e-mailed (green check mark) and/or in alerts (red
exclamation point) for the e-mail settings specified in E-Mail Server 1.
The ZyWALL does not e-mail debugging information, even if it is
recorded in the System log.
Select whether each category of events should be included in log
messages when it is e-mailed (green check mark) and/or in alerts (red
exclamation point) for the e-mail settings specified in E-Mail Server 2.
The ZyWALL does not e-mail debugging information, even if it is
recorded in the System log.
For each remote server, select what information you want to log from
each Log Category (except All Logs; see below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green checkmark) - log regular information and
alerts from this category
enable normal logs and debug logs (yellow check mark) - log regular
information, alerts, and debugging information from this category
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
ZyWALL USG 20/20W User's Guide