Set Up User Accounts; Create The Wlan Interface - ZyXEL Communications ZYWALL USG 20 Manual

the WLAN interfaces before or after you install the wireless LAN card. This
example shows how to create a WLAN interface that uses WPA or WPA2 security
and the ZyWALL's local user database for authentication.

7.13.1 Set Up User Accounts

The ZyWALL supports TTLS using PAP so you can use the ZyWALL's local user
database with WPA or WPA2 instead of needing an external RADIUS server. For
each WLAN user, set up a user account containing the user name and password
the WLAN user needs to enter to connect to the wireless LAN.
Click Configuration > Object > User/Group > User and the Add icon.
1
Set the User Name to wlan_user. Enter (and re-enter) the user's password.
2
Click OK.
Figure 105 Configuration > Object > User/Group > User > Add
Use the Add icon in the Configuration > Object > User/Group > User screen
3
to set up the remaining user accounts in similar fashion.

7.13.2 Create the WLAN Interface

Click Configuration > Network > Interface > WLAN > Add to open the
1
WLAN Add screen.
ZyWALL USG 20/20W User's Guide
Chapter 7 Tutorials
147