The Ddns Screen - ZyXEL Communications ZYWALL USG 20 Manual

Chapter 16 DDNS
Note: Record your DDNS account's user name, password, and domain name to use
to configure the ZyWALL.
After, you configure the ZyWALL, it automatically sends updated IP addresses to
the DDNS service provider, which helps redirect traffic accordingly.
Finding Out More
See Section 6.5.8 on page 98

16.2 The DDNS Screen

The DDNS screen provides a summary of all DDNS domain names and their
configuration. In addition, this screen allows you to add new domain names, edit
the configuration for existing domain names, and delete domain names. Click
Configuration > Network > DDNS to open the following screen.
Figure 200 Configuration > Network > DDNS
The following table describes the labels in this screen.
Table 92 Configuration > Network > DDNS
LABEL
Add
Edit
Remove
Activate
Inactivate
#
Status
Profile Name
DDNS Type
Domain Name
332
for related information on these screens.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This is the number of an individual DDNS profile.
This icon is lit when the entry is active and dimmed when the entry is
inactive.
This field displays the descriptive profile name for this entry.
This field displays which DDNS service you are using.
This field displays each domain name the ZyWALL can route.
ZyWALL USG 20/20W User's Guide