Chapter 43 System
Under Time and Date Setup, enter a Time Server Address
43.5 Console Port Speed
This section shows you how to set the console port speed when you connect to the
ZyWALL via the console port using a terminal emulation program. See
Click Configuration > System > Console Speed to open the Console Speed
Figure 371 Configuration > System > Console Speed
The following table describes the labels in this screen.
Table 194 Configuration > System > Console Speed
43.6 DNS Overview
DNS (Domain Name System) is for mapping a domain name to its corresponding
IP address and vice versa. The DNS server is extremely important because
without it, you must know the IP address of a machine before you can access it.
for default console port settings.
Use the drop-down list box to change the speed of the console port.
Your ZyWALL supports 9600, 19200, 38400, 57600, and 115200 bps
(default) for the console port.
The Console Port Speed applies to a console port connection using
terminal emulation software and NOT the Console in the ZyWALL Web
Configurator Status screen.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
(Table 193 on page
Table 2 on
ZyWALL USG 20/20W User's Guide