The Zone Screen - ZyXEL Communications ZYWALL USG 20 Manual

Unified security gateway
Hide thumbs Also See for ZYWALL USG 20:
Table of Contents

Advertisement

15.2 The Zone Screen

The Zone screen provides a summary of all zones. In addition, this screen allows
you to add, edit, and remove zones. To access this screen, click Configuration >
Network > Zone.
Figure 198 Configuration > Network > Zone (USG 20W)
The following table describes the labels in this screen.
Table 89 Configuration > Network > Zone
LABEL
User
Configuration /
System
Default
Add
Edit
Remove
Object
References
#
Name
Block Intra-
zone
Member
ZyWALL USG 20/20W User's Guide
DESCRIPTION
The ZyWALL comes with pre-configured System Default zones that you
cannot delete. You can create your own User Configuration zones
Click this to create a new, user-configured zone.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove a user-configured trunk, select it and click Remove. The
ZyWALL confirms you want to remove it before doing so.
Select an entry and click Object References to open a screen that
shows which settings use the entry. See
an example.
This field is a sequential value, and it is not associated with any
interface.
This field displays the name of the zone.
This field indicates whether or not the ZyWALL blocks network traffic
between members in the zone.
This field displays the names of the interfaces that belong to each zone.
Chapter 15 Zones
Section 11.3.2 on page 232
for
329

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall usg 20wZywall usg 2000

Table of Contents